Summer heat is coming! Before the temperatures begin to climb, it’s a great time to prepare your AC unit for the summer months ahead. A little proactive maintenance on your cooling system will ensure you can enjoy the summer heat knowing that cool comfort awaits inside.
There are a lot of benefits that come with being prepared. When your AC unit is in tip-top shape, it will run more efficiently, cool more evenly, and you might save a lot of money on your energy bills.
Plus, you won’t have to deal with costly emergency service calls or have to endure a scorching Las Vegas summer day while you wait for the work to get done.
Of course, if you are okay with doing some minor upkeep yourself, there are a few things you can do to get a jump on things:
Change your filters
Your AC filters should be changed regularly to ensure good air quality and to keep your system running at its peak. Every system and filter have their own recommendations but swapping your old filters out for new ones twice a year (between seasons) is a good rule of thumb.
Clean the condenser coils and the area around your unit
If you have central air, your unit is likely located outside your home. If it is a large commercial unit, it might be on the roof of your building. During the year, the unit and the condenser coils inside can clog up with leaves, dirt, and debris resulting in reduced efficiency.
If branches, dirt, and leaves have collected around your unit, clear them away completely. Be sure to remove any plants, weeds, or vines that may obstruct the natural airflow. If you don’t feel comfortable opening up the unit to clean the condenser coils, call AC Plus, and we’ll be happy to help.
Check your coolant and drainage lines
Do a visual check of all lines to ensure they are connected tightly and in good condition. Even a small leak can affect how your AC unit runs. If you find any loose lines, reconnect them. If you see any visible damage, call your HVAC technician right away, and do not turn on your unit until the issue is resolved.
Test out your unit
Turning your AC unit on is the last step in the chain. Set the thermostat to a couple of degrees below room temperature. The cooling system should come on automatically. Let it run for a few minutes to see if it is cooling efficiently. If you hear any unusual noises, smell any unpleasant smells, if the unit is blowing dust, or if it isn’t reaching the desired temperature, shut everything down and call AC Plus right away.
Another advantage of scheduling your seasonal AC system service early in the season is that technicians won’t be quite as busy as they will be when the heat waves start to roll in. Call to schedule your springtime AC maintenance service today and find out why we are Las Vegas’ favorite HVAC technicians.
Many people enjoy the cool, crisp air of fall and relish in pulling all those sweaters and jackets out of storage. But with those warm layers, homeowners are often tempted to maximize their energy savings in early fall when it’s too cool for air conditioning but not cold enough to require the furnace.
If you’re waiting until the last minute to turn the furnace on, it’s still important to test your system as early as possible. Things can go wrong even while your furnace is on summer vacation, and you don’t want to wait until the first really cold day to find out.
The First Cycle of the Season
Before turning on your furnace for the first time in months, it’s a good idea to check the area of your furnace unit for any flammable materials. Sometimes these things get left behind during the summer months when the furnace is cool, and they could present a fire hazard during the cold, dry winter.
Next, open a few windows throughout your home, because the first cycle is liable to spread a somewhat foul odor. This is usually harmless, however — dust and lint settle on furnace heating elements all summer long, and when the furnace finally gets fired up, those particles burn quickly. The result is usually a burning smell that clears after a few minutes.
After the furnace kicks on, let it run for at least ten minutes. You’ll want to make sure any initial burning smell goes away — if not, there may be a problem with your furnace and you should shut it down immediately before calling for service. You should also listen carefully for any new or troubling sounds coming from your furnace, as these are also common signs of trouble.
Even if you have carbon monoxide detectors in your own home, you might someday find yourself in an environment with dangerous carbon monoxide levels and no alarm system. In that case, it’s important to know the symptoms and what to do.
Victims of carbon monoxide poisoning may experience dizziness, nausea, headaches, weakness, confusion or chest pain. After enough exposure, victims lose consciousness. It’s critical that everyone go outside and into the fresh air as quickly as possible, and then seek medical attention. Even if the symptoms gradually disappear on their own, carbon monoxide poisoning is a serious medical event that requires treatment.
No one should re-enter the home or building until HVAC technicians have been contacted for emergency service. Carbon monoxide may still be building up inside, and the structure will need to be completely ventilated before it’s safe to reenter.
In the common household, heating and cooling accounts for almost half of all power costs. But with the right know-how, you can stretch you climate control dollar and even take care of some of your personal routine upkeep. And since new HVAC systems and efficiency requirements are merging at an ever-escalating pace, it’s much more essential than ever to remain on top pf the most recent possibilities to make cost-efficient upgrades.
There are lots of options with regards to buying and selecting Heating and cooling systems. The commonest one to be is the split system HVAC system. You can find them in companies also in residential homes. They’re known as split systems for the reason that it has components that can be located inside and outdoors. Split systems awesome refrigerant to create awesome air and may even have a gas furnace to create heat. They’re normally affordable and incredibly efficient.
The indoor air is circulated by ducts and aided with evaporator coils or fan coils. The machine is controlled by using a thermostat. Newer systems allow you to manage your thermostat with an application on your smartphone so that you can be in charge of your temperature even if you’re from your house or business.
A Hybrid heat split method considerably more energy-efficient simply because make use of an electric. The pump comes with the capacity heat or awesome refrigerant and it is completely electrically powered. If you’re trying to heat or awesome a huge area, a duct-free split system along with a split system could possibly get push cold air or heat into difficult to achieve areas. If you do not possess the space for any split system, packaged heating and AC systems are a possible option. They will use an easy single unit, an AC or electric that merges having a fan coil or evaporator coil. It’s a perfect alternative for temperature control in a tiny space.